Raktáron Forró termék
UST4C11
UST4C11 ST4-C11 PANASONIC Controller for ST4
$0.00
USD
3452 raktáron
Főbb specifikációk
Tétel:
Specifications
PFHD:
Refer to the following table(Note： (Probability of dangerous failure per hour) depends on number of single beam sensorST4-A□connected to controller.)
MTTFD:
More than 100 years (Note：Mean time to dangerous failure (in years))
Súly:
Net weight: 180 g approxGross weight: 390 g approx
Beszállítói információk
PANASONIC
Termékek: 4316
Általában 2-3 munkanapon belül szállítjuk
Minőség garantált
Gyors szállítás
Műszaki támogatás
Műszaki adatok
| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| PFHD | Refer to the following table(Note： (Probability of dangerous failure per hour) depends on number of single beam sensorST4-A□connected to controller.) |
| MTTFD | More than 100 years (Note：Mean time to dangerous failure (in years)) |
| Súly | Net weight: 180 g approxGross weight: 390 g approx |
| Részletek | Controller |
| Termék | Compact Type 4 Safety Beam Sensor |
| Anyag | Enclosure: ABS |
| Cikkszám | ST4-C11 |
| Termék neve | Compact Type 4 Safety Beam Sensor ST4 |
| Kábelkábel | Terminal block connector: 0.2 to 1.5 mm2 |
| Tápfeszültség | 24 V DC +10-15 % Ripple P-P 10 % or less |
| Válaszidő | OFF response: 25 ms or lessON response: 90 ms or less (auto reset) / 140 ms or less (manual reset) |
| Termékszám | ST4-C11 |
| Segédkimenetek | PNP open-collector transistor / NPN open-collector transistor (Set using output polarity selection switch)ST4-C11: one outputST4-C12EX: four outputs[PNP output]Maximum source current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and +V)Residual voltage: 2.5 V or less (at 100 mA source current)[NPN output]Maximum sink current: 100 mAApplied voltage: same as the supply voltage (between auxiliary output and 0 V)Residual voltage: 2.0 V or less (at 100 mA sink current)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Némítólámpa kimenet | -(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Csatlakozó terminál | Detachable spring-cage terminal |
| Áramfogyasztás | 100 mA or less (excluding sensor head ST4-Ax) |
| Alkalmazandó szabványok | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the controller is used in combination with the sensor head ST4-x. |
| Alkalmazható érzékelőfej | ST4-Ax |
| CE-jelölési irányelvnek való megfelelés | Machinery Directive, EMC Directive, RoHS Directive |
| Segédkimenetek: Üzemmód | OFF when all beams of the connected ST4-Axs are receivedON when one or more beams of the connected ST4-Axs are interrupted |
| Vezérlő kimenetek (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open-collector transistor Dual output x 1 system (Set using output polarity selection switch)[PNP output]Maximum source current: 200 mAApplied voltage: same as the supply voltage (between control output and +V)Residual voltage: 2.5 V or less (at 200 mA source current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. source current)Load wiring resistance: 3 Ohm or less (between control output and load)[NPN output]Maximum sink current: 200 mAApplied voltage: same as the supply voltage (between control output and 0 V)Residual voltage: 2.0 V or less (at 200 mA sink current)Leakage current: 200 micro A or less (including power OFF condition)Maximum load capacity: 1 micro F (from no-load to max. sink current)Load wiring resistance: 3 Ohm or less (between control output and load)(Note) If the total current of the control outputs (OSSD1, OSSD2), auxiliary outputs, and muting lamp output exceeds 400 mA, the wiring resistance between the controller and the power supply should be 1 Ohm or less. In addition, if the total current is 400 mA or less, the wiring resistance between the controller and the power supply should be 2 Ohm or less. |
| Segédkimenetek: Védőáramkör | Incorporated |
| Némító lámpa kimenet: Védő áramkör | Incorporated |
| Környezeti ellenállás: Környezeti páratartalom | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Környezeti ellenállás: Ütésállóság | 300 m/s2acceleration in X, Y and Z directions three times each |
| Környezeti ellenállás: Környezeti hőmérséklet | －10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: －25 to +70 ℃－13 to +158℉ |
| Környezeti ellenállás: Védettségi fok | Enclosure: IP40 (IEC)Terminal: IP20 (IEC) |
| Környezeti ellenállás: Rezgésállóság | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Környezeti ellenállás: Szigetelési ellenállás | 20 MOhm or more with 500 V DC mega between all supply terminals connected together and enclosure |
| Vezérlő kimenetek (OSSD 1, OSSD 2): Üzemmód | ON when all beams of the connected ST4-Axs are receivedOFF when one or more beams of the connected ST4-Axs are interruptedOFF during lockout |
| Alkalmazható érzékelőfej: Soros csatlakozások száma | Interference prevention possible when up to a maximum of 6 sets are connected(When the maximum of 3 controllers are connected together, interference prevention is possible for up to 18 sets) |
| Vezérlő kimenetek (OSSD1, OSSD2): Védő áramkör | Incorporated |
| Környezeti ellenállás: Feszültségállóság | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Termékleírás
Standard Control Unit Safety Barrier Category 4 Ple SIL 3, ST4 Series
Főbb jellemzők
- Ipari minőségű
- RoHS-kompatibilis
- CE minősítésű
- 1 év garancia
Termékdokumentumok
Adatlap
Műszaki adatok és teljesítményadatok
Felhasználói kézikönyv
Telepítési és üzemeltetési útmutató
