| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Kábel | 0.1 mm24-core PFA cabtyre cable, 2 m6.562 ftlong |
| Súly | Net weight: 45 g approxGross weight: 110 g approx |
| Részletek | Sensor [For chemical liquid] |
| Termék | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] |
| Anyag | Enclosure: PFA |
| Védelem | IP65 / IP67 (IEC) |
| Cikkszám | SQ4-A22-N |
| Termék neve | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] SQ4 |
| Tápfeszültség | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Termékszám | SQ4-A22-N |
| Érzékelő tárgy | Sulfuric acid, Hydrochloric acid,Phosphoric acid, Ammonia, Fluorinert (Note 2), Galden (Note 2), Hydrofl uoric acid etc. (Note 3)(Note 1) Highly viscous liquid may not be stably detected.(Note 2) The agents mentioned above are examples. It may not be detected depending on viscosity the agent.Before using this device, check the detecting liquid and installation condition.(Note 3) Fluorinert is the world wide trademark of 3M. Galden is the registered trademark of Solvay. |
| Környezeti páratartalom | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Kibocsátó elem | Infrared LED (modulated) |
| Környezeti hőmérséklet | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed) (Note) Storage: -10 to +55 ℃+14 to +131 ℉(Note) Liquid being detected should be also kept within the rated ambient temperature range. |
| Áramfogyasztás | 30 mA or less |
| Felhasználási kategória | DC-12, DC-13 |
| Érzékelési kimenet (szivárgásérzékelés) | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: Same as the supply voltage (between detection output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current) |
| Segédkimenet érzékelése (Kezdeti érzékelés) | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: Same as the supply voltage (between detection auxiliary output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current) |
| Érzékelési kimenet (szivárgásérzékelés): Válaszidő | 10 ms or less |
| Érzékelési kimenet (szivárgásérzékelés): Kimeneti működés | ON when normal condition or initial detection, OFF when detection leakage or wrong installation |
| Segédkimenet érzékelése (Kezdeti érzékelés): Válaszidő | 50 ms or less |
| Érzékelő kimenet (szivárgásérzékelés): rövidzárlatvédelem | Incorporated |
| Segédkimenet érzékelése (Kezdeti érzékelés): Kimeneti működés | ON when normal condition, OFF when initial detection or accidental leakage |
| Segédkimenet érzékelő (Kezdeti érzékelés): Rövidzárlatvédelem | Incorporated |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató