Raktáron Forró termék
USFC21
USFC21 SF-C21 PANASONIC Safety control unit for safety light curtain and other safety products, 8 inputs 24V..
$0.00
USD
4642 raktáron
Főbb specifikációk
Tétel:
Specifications
Súly:
Net weight: 190 g approx.Gross weight: 320 g approx.
Termék:
Safety Control Unit
Anyag:
Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate
Beszállítói információk
PANASONIC
Termékek: 4316
Általában 2-3 munkanapon belül szállítjuk
Minőség garantált
Gyors szállítás
Műszaki támogatás
Műszaki adatok
| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Súly | Net weight: 190 g approx.Gross weight: 320 g approx. |
| Termék | Safety Control Unit |
| Anyag | Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate |
| PFHD/MTTFD | 9.73 x 10−10/ 100 years or more |
| Cikkszám | SF-C21 |
| Kábelhossz | 100 m328.084 ftor less |
| Termék neve | Safety Control Unit SF-C21 |
| Termékszám | SF-C21 |
| Szennyezettségi fok | 2 |
| Csatlakozási módszer | Input / output and power supply: Detachable spring cage termina l blocksRS-485: Detachable spring-cage terminal blockUSB: Mini-B male |
| Kapcsolódó szabványok | IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 |
| Reteszelő funkció | Incorporated |
| Üzemeltetési magasság | 2,000 m6561.680 ftor less(Note) Do not use or store this device in a pressurized environment beyond the atmospheric pressure at sea level. |
| Rezgésállóság | 5 to 8.4 Hz frequency, 3.5 mm0.138 inhalf amplitude, 8.4 to 150 Hz frequency, Max. acceleration 9.8 m/s2(1 G), in X, Y and Z directions for two hours each (IEC / EN 60068-2-6) |
| Logikai beállítási funkció | Input mode, control mode, output mode, reset mode, auxiliary ou tput mode |
| Túlfeszültség kategória | II |
| Némításjelző kimenet | Semiconductor photo MOS relay output x 1- Maximum load current: 60 mA- Supply voltage: Same as the voltage of the power supply for internal- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Kioldó funkció | Incorporated |
| Logikai kiválasztási funkció | No.0: Customization controlNo.1: Overall stop controlNo.2: Parallel muting controlNo.3: Sequential muting controlNo.4: Partial stop control 1No.5: Partial stop control 2No.6: Two-hand controlNo.7: OR controlNo.8: Operation mode selection control |
| Biztonsági bemenet (IN1 - IN8) | 2 inputs x 4, Rated voltage: Same as the voltage of the power supply for internal |
| Alkalmazható szabványok: EMC | IEC 61000-6-2, IEC 61326-3-1, EN 55011 |
| Indítási idő bekapcsolás után | 2 sec. or less |
| Alkalmazandó szabványok: Biztonság | IEC 61508-1 to 3, EN 61508-1 to 3 (SIL3), ISO 13849-1:2015 (Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061 (SILCL3), UL 61010-1, UL 61010-2-201, UL 1998 |
| Vezérlő kimenet (OUT1 - OUT4) | PNP open-collector transistor with 2 outputs x 2- Maximum source current: 300 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Kommunikációs funkció (MODBUS RTU) | Interface: RS-485Protocol: MODBUS RTUMaximum transmission distance: 100 m328.084 ftMaximum number of units that can be connected: 8 units (slaves) |
| Külső eszközfelügyeleti funkció | Incorporated |
| Biztonsági bemenet (IN1 - IN8): BE szint | Input voltage: 18 VInput current: 3.5 mA |
| Némításjelző kimenet: Kimeneti mód | ON when muting / override |
| Biztonsági bemenet (IN1 - IN8): KI szint | Input voltage: 5 VInput current: 1.0 mA |
| Némításjelző kimenet: Válaszidő | 10 ms or less |
| Alkalmazandó előírások és tanúsítványok | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety)Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification, Korea's Radio Waves Act conformity registration |
| Környezeti ellenállás: Környezeti páratartalom | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Környezeti ellenállás: Ütésállóság | 147 m/s2(15 G) 11 ms in X, Y and Z directions for three times each (IEC / EN 60068-2-27) |
| Tápfeszültség: Külső tápegység | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Tápfeszültség: Belső tápegység | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Vezérlő kimenet (OUT1 - OUT4): Kimeneti mód | True: ONFalse: OFF |
| Biztonsági bemenet (IN1 - IN8): Bemeneti impedancia | 4.7 KΩ approx. |
| Környezeti ellenállás: Környezeti hőmérséklet | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| Vezérlő kimenet (OUT1 - OUT4): Válaszidő | OFF response: 10 ms or lessON response: 100 ms or less |
| Környezeti ellenállás: Védettségi fok | IP20 (IEC)(must be installed in a control panel with protectio n IP54 or higher) |
| Környezeti ellenállás: Szigetelési ellenállás | 20 MΩ, or more, with 500 V DC megger(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Áramfelvétel: Külső tápegység | 100 mA or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Áramfelvétel: Belső tápegység | 200 mA or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Biztonsági bemenet (IN1 - IN8): Névleges bemeneti áram | 5 mA approx. |
| Segédkimenet (AUX1 - AUX4) (Nem biztonsági kimenet) | PNP open-collector transistor with 1 output x 4- Maximum source current: 60 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Vezérlő kimenet (OUT1 - OUT4): Bekapcsolás késleltetés funkció | Incorporated |
| Környezeti ellenállás: Feszültségállóság | 1,000 V AC for one min.(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Vezérlő kimenet (OUT1 - OUT4): Kikapcsolás késleltetési funkció | Incorporated |
| Némításjelző kimenet: Rövidzárlatvédelem | Incorporated |
| Vezérlő kimenet (OUT1 - OUT4): Rövidzárlatvédelem | Incorporated |
| Biztonsági bemenet (IN1 - IN8): Észlelhető bekapcsolt állapot időtartama | 10 ms or more |
| Biztonsági bemenet (IN1 - IN8): Az észlelhetetlen kikapcsolt állapot időtartama | 0.7 ms or less |
| Segédkimenet (AUX1 - AUX4) (Nem biztonsági kimenet): Válaszidő | 10 ms or less |
| Segédkimenet (AUX1 - AUX4) (Nem biztonsági kimenet): Rövidzárlatvédelem | Incorporated |
| Segédkimenet (AUX1 - AUX4) (Nem biztonsági kimenet): Kimeneti mód (gyári alapértelmezett beállítások) | AUX1: Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)AUX2: Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)AUX3: Reset trigger output (ON under reset release wait condition)AUX4: Lockout output (OFF when lockout) |
| Segédkimenet (AUX1 - AUX4) (Nem biztonsági kimenet): Kimeneti mód (A segédkimenetek bármelyike testreszabható a szoftvereszköz segítségével) | Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)Positive logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is ON)Positive logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is ON)Outputs A, B, C, and D of diagnosis results of input blocks (ON when logic is true)Outputs E, F, and G of internal logic circuit diagnostic results (ON when logic is true)Reset trigger output (ON under reset release wait condition)Lockout output (OFF when lockout)Muting indicator output (ON when muting / override)Monitor output in response to IN1 to IN8 (ON when input)No output (normally OFF) |
Termékleírás
Control unit for barriers and other safety products, Cat. 4(Ple) and SIL3, 4 inputs, 2 outputs, 8 pre-established logics according to cat regulations. 4 (Ple) and 1 customizable logic, self-diagnostic
Főbb jellemzők
- Ipari minőségű
- RoHS-kompatibilis
- CE minősítésű
- 1 év garancia
Termékdokumentumok
Adatlap
Műszaki adatok és teljesítményadatok
Felhasználói kézikönyv
Telepítési és üzemeltetési útmutató
