Raktáron Forró termék
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00
USD
4292 raktáron
Főbb specifikációk
Tétel:
Specifications
Megjegyzés:
Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
Stroke:
10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Súly:
Net weight: 80 g approx.
Beszállítói információk
PANASONIC
Termékek: 4316
Általában 2-3 munkanapon belül szállítjuk
Minőség garantált
Gyors szállítás
Műszaki támogatás
Műszaki adatok
| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Megjegyzés | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| Stroke | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Súly | Net weight: 80 g approx. |
| Részletek | Air-driven type10 mm0.394 intype General purpose |
| Termék | Contact-Type Digital Displacement Sensor |
| Anyag | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| Tartozék | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| Felbontás | 0.5 μm0.02 mil |
| Cikkszám | HG-S1010-AC |
| Termék neve | Contact-Type Digital Displacement Sensor HG-S |
| Használható folyadék | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| Mintavételi gyakoriság | 1 ms |
| Termékszám | HG-S1010-AC |
| Alkalmazható cső | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| Mérőerő | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| Mérési tartomány | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Földelési módszer | Capacitor grounding |
| Szennyezettségi fok | 2 |
| Hot swap funkció | Incorporated |
| Üzemeltetési magasság | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Működésjelző | Equipped (2-color LED: Orange / Green) |
| Tipp eltérés mértéke | 35 μm1.378 mil(typical value) |
| Alkalmazható vezérlő | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| Szigetelési ellenállás | 100 MΩ or more at 250 V DC |
| Szabályozási megfelelés | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Üzemi nyomástartomány | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| Kijelzési pontosság (PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| Pozícióérzékelési módszer | Optical absolute linear encoder method |
| Nyomásálló képesség | 0.2 MPa |
| Környezeti ellenállás: Védelem | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| Környezeti ellenállás: Környezeti páratartalom | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Környezeti ellenállás: Ütésállóság | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| Környezeti ellenállás: Környezeti hőmérséklet | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Környezeti ellenállás: Rezgésállóság | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
Termékleírás
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
Főbb jellemzők
- Ipari minőségű
- RoHS-kompatibilis
- CE minősítésű
- 1 év garancia
Termékdokumentumok
Adatlap
Műszaki adatok és teljesítményadatok
Felhasználói kézikönyv
Telepítési és üzemeltetési útmutató
