| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Kábel | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong. |
| Kimenet | NPN open-collector transistor- Maximum sink current: 20 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 20 mA sink current) |
| Megjegyzés | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉. |
| Súly | Net weight (each emitter and receiver) : 15 g approx.Gross weight: 35 g approx. |
| Részletek | Thru-beam [Side sensing] |
| Termék | Ultra-minute Photoelectric Sensor |
| Anyag | Enclosure: PBTLens: PolycarbonateMetallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| Tartozék | M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length) |
| Földelés | Floating |
| Védelem | IP67 (IEC) |
| Cikkszám | EX-Z12B-R |
| Termék neve | Ultra-minute Photoelectric Sensor EX-Z |
| Válaszidő | 0.5 ms or less |
| Érzékelési tartomány | 200 mm7.874 in |
| Termékszám | EX-Z12B-R |
| Tápfeszültség | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Kábelhosszabbító | Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| Környezeti páratartalom | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Kibocsátó elem | Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated) |
| Kimeneti művelet | Dark-ON |
| Ütésállóság | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each |
| Környezeti megvilágítás | Incandescent light: 5,000 ℓx at the light-receiving face |
| Környezeti hőmérséklet | -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉ |
| Áramfogyasztás | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Min. érzékelt tárgy | ø0.5 mmø0.02 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm7.874 in) |
| Működésjelző | Orange LED (Lights up when the sensing output is ON) |
| Stabilitásjelző | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| Rezgésállóság | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| Szigetelési ellenállás | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Feszültségállóság | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Kimenet: Rövidzárlatvédelem | Incorporated |
| Alkalmazandó előírások és tanúsítványok | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| Ismételhetőség (az érzékelési tengelyre merőlegesen) | 0.03 mm0.001 inor less |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató