| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Kábel | 0.09 mm24-core cabtyre cable 1 m3.280 ft |
| Súly | Net weight: 15 g approx., Gross weight: 25 g approx. |
| Részletek | for ø4 mmø0.156 intube |
| Termék | For small diameter tubes Optical Bubble Sensor |
| Anyag | Enclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate |
| Cikkszám | BE-A401 |
| Termék neve | For small diameter tubes Optical Bubble Sensor BE-A |
| Termékszám | BE-A401 |
| Érzékelő tárgy | Liquid(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly. |
| Tápfeszültség | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Kábelhosszabbító | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m65.167 ft. |
| Szorítónyomaték | 0.5N•m or less |
| Emitter elem | Infrared LED(Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| Észlelhető légrés | 0.8 mm0.032 inor more(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. |
| Áramfogyasztás | 15 mA or less |
| Működésjelző | Orange LED (lights up with absent liquid) |
| Védő áramkörök | Power supply reverse polarity protection , Output reverse polarity protection |
| Alkalmazható csőtípus | Transparent resin tube (equivalent to flexible PVC)(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| Megfelelő szabályozás | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Alkalmazható csőátmérő (külső átmérő × belső átmérő) | ø4 mm × ø2.4 mmø5/32 in × ø3/32 in(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| Válaszidő: Buborék észlelésekor | 20 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| Válaszidő: Folyadék észlelésekor | 80 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| Kimenet (2 kimenettel együtt) | NPN open-collector transistor•Maximum sink current: 50 mA•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA) |
| Környezeti ellenállás: Védelem | IP40 (IEC) |
| Környezeti ellenállás: Környezeti páratartalom | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Környezeti ellenállás: Ütésállóság | 100 m/s2acceleration in X, Y, and Z directions three times each |
| Környezeti ellenállás: Környezeti megvilágítás | Fluorescent light: 1,000 ℓx at the light-receiving face |
| Környezeti ellenállás: Környezeti hőmérséklet | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉(Note) Liquid being detected should also be kept within the rated ambient temperature range. |
| Környezeti ellenállás: Rezgésállóság | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each |
| Környezeti ellenállás: Szigetelési ellenállás | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Környezeti ellenállás: Feszültségállóság | 1,000 V AC for between one min. between all supply terminals connected together and enclosure |
| Kimenet (2 kimenettel együtt): Kimeneti működés | Switchable either Liquid-absent-ON or Liquid-present-ON |
| Kimenet (2 kimenettel együtt): Rövidzárlatvédelem | Incorporated |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató