| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| PFHD | 6.22 × 10-9 |
| MTTFD | 100 years or more |
| Részletek | Min. sensing object ø47 mmø1.850 intype (40 mm1.575 inbeam pitch) |
| Termék | Safety Light Curtain Type 2 |
| Anyag | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| Sugármagasság | 40 mm1.575 in |
| Cikkszám | SF2B-A10-P |
| Termék neve | Safety Light Curtain Type 2 SF2B Ver.2 |
| Tápfeszültség | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| Válaszidő | OFF response: 15 ms or lessON response: 40 to 60 ms |
| Termékszám | SF2B-A10-P |
| Kábelhosszabbító | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| Működési tartomány | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| Környezeti páratartalom | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Kibocsátó elem | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Ütésállóság | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Csatlakozási módszer | Connector |
| Védő magasság | 392 mm15.433 in |
| Környezeti megvilágítás | Incandescent light: 3,500 lx or less at the light-receiving face |
| Környezeti hőmérséklet | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| Áramfogyasztás | Emitter: 35 mA or lessReceiver: 50 mA or less |
| Min. érzékelt tárgy | ø47 mmø1.850 inopaque object |
| Sugárcsatornák száma | 10 |
| Rezgésállóság | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Szigetelési ellenállás | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Segédkimenet (Aux) | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| Kibocsátás-leállító funkció | Incorporated |
| Szinkronizációs módszer | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| Effektív rekeszszög | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| Alkalmazható szabványok: Japán | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| CE-jelölési irányelvnek való megfelelés | Machinery Directive, EMC Directive, RoHS Directive |
| Alkalmazható szabványok: Európa (EU) | EN 61496-1 (Type 2), EN 55011 |
| Vezérlő kimenetek (OSSD 1, OSSD 2) | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| Interferencia-megelőzési funkció | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| Alkalmazható szabványok: Észak-Amerika | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| Külső eszközfelügyeleti funkció | Incorporated |
| Segédkimenet (Aux): Üzemmód | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| Súly (adó és vevő összesen) | 510 g approx. |
| Segédkimenet (Aux): Védőáramkör | Incorporated |
| Alkalmazandó szabványok: Nemzetközi szabvány | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| Környezeti ellenállás: Védettségi fok | IP65 (IEC) (*IP67 is later than Ver.2) |
| Vezérlő kimenetek (OSSD 1, OSSD 2): Üzemmód | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| Vezérlő kimenetek (OSSD1, OSSD2): Védő áramkör | Incorporated |
| Környezeti ellenállás: Átütési szilárdság feszültség | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató