| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Típus | Ultra low inertia |
| Tengely | Key-way, center tap |
| Termék | Servo Motor |
| Jellemzők | Compact Servo Only for Position Control. |
| Olajtömítés | without |
| Befoglaló doboz | IP65 |
| Tömeg (kg) | 0.96 |
| Cikkszám | MUMA022P1S |
| Termék neve | MINAS E series Servo Motor |
| Névleges teljesítmény | 200 W |
| Tartófék | without |
| A burkolatról | Except rotating portion of output shaft and leadwire end. |
| Névleges nyomaték (N⋅m) | 0.64 |
| Feszültségspecifikációk | 200 V |
| Névleges áram (A (rms)) | 1.6 |
| Környezeti feltételek | For more details, please refer to the instruction manual. |
| Forgójeladó: Felbontás | 10000 |
| Névleges fordulatszám (ford/perc) | 3000 |
| Forgójeladó: specifikációk | 2500 P/r Incremental |
| A regeneratív fékezés frekvenciájáról | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Névleges forgási sebesség Max. sebesség (r/perc) | 5000 |
| Pillanatnyi maximális csúcsnyomaték (N⋅m) | 1.91 |
| Regeneratív fékezési frekvencia (szor/perc) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| A rotor tehetetlenségi nyomatéka (x10⁻⁴kg ⋅ m²) | 0.10 |
| A terhelés és a forgórész ajánlott tehetetlenségi nyomatékának aránya | 30 times or less |
| A terhelés és a forgórész ajánlott tehetetlenségi nyomatékarányáról | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató