Raktáron Forró termék
HVG-150-24B
HVG-150-24B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 13.2-24V / 6.2A, 150W. IP67, 3 ..
$0.00
USD
4393 raktáron
Főbb specifikációk
Név:
HVG-150-24B
Állami:
Recommended Model
Formátum:
Box
Sorozat:
HVG-150-B
Beszállítói információk
MEANWELL
Termékek: 6448
Általában 2-3 munkanapon belül szállítjuk
Minőség garantált
Gyors szállítás
Műszaki támogatás
Műszaki adatok
| Paraméter | Érték |
|---|---|
| Név | HVG-150-24B |
| Állami | Recommended Model |
| Formátum | Box |
| Sorozat | HVG-150-B |
| Fényerőszabályozás | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Jóváhagyások | UL |
| Teljesítmény (W) | 150,00 |
| Alformátum | IP67 |
| Szélesség (mm) | 68.00 |
| Magasság (mm) | 38.80 |
| AC bemenet Max. | 528,00 |
| AC bemenet Min. | 180,00 |
| Alkalmazások | Lighting |
| Gyártó | MEAN WELL |
| Terméktípus | LED Driver |
| Izoláció (V) | 3.750,00 |
| Csúcsteljesítmény (W) | One hundred fifty |
| Bemeneti csatlakozó | Cable |
| Bemeneti frekvencia | 50 Hz, 60 Hz |
| Hosszú/Háttér | 245.00 |
| Hosszú leírás | LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range180-528Vca47-63Hz.Output in constant current6,25 A.Range of output voltage with current mode constant13,2 to 24vdcaccording to demand load.Power:150W.Efficiency typical:91%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):245 x 68 x 38,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 24V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Kimeneti csatlakozó | Cable |
| Belépés típusa CA | Three-phase |
| Garancia (év) | 5,00 |
| Származási ország | China |
| Kimeneti áram mA | 6000, 7000 |
| Minimális kimeneti intenzitás (mA) | 6.250,00 |
| Kimeneti maximális intenzitás (mA) | 6.250,00 |
Termékleírás
More details
Főbb jellemzők
- Ipari minőségű
- RoHS-kompatibilis
- CE minősítésű
- 1 év garancia
Műszaki adatok
LED driver dimmable with phase input.
Termékdokumentumok
Adatlap
Műszaki adatok és teljesítményadatok
Felhasználói kézikönyv
Telepítési és üzemeltetési útmutató
