| Paraméter | Érték |
|---|---|
| Tétel | Specifications |
| Kimenet | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Részletek | General purpose |
| Termék | Leak Detection Sensor |
| Anyag | Enclosure: Polypropylene |
| Védelem | IP67 (IEC) |
| Cikkszám | EX-F72-C5 |
| Termék neve | Leak Detection Sensor EX-F70/EX-F60 |
| Válaszidő | 50 ms or less |
| Termékszám | EX-F72-C5 |
| Érzékelő tárgy | Water, Fluorinert™Note:Highly viscous liquid may not be detected stably.Note:Fluorinert is the world wide trademark of 3M. |
| Tápfeszültség | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Kábelhosszabbító | Extension up to total 50 m164.042 ft |
| HIBA jelzőfény | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Környezeti páratartalom | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Kibocsátó elem | Infrared LED (non-modulated) |
| NORMÁL jelzőfény | Green LED (lights up when the sensor is mounted properly) |
| Környezeti megvilágítás | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Környezeti hőmérséklet | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Áramfogyasztás | 10 mA or less(PNP output type: 15 mA or less) |
| Kimenet: Kimeneti művelet | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Kimenet: Rövidzárlatvédelem | Incorporated |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató