| Paraméter | Érték |
|---|---|
| M12 | |
| M18 | 7 mm |
| M30 | 10 mm |
| COM3 | E2E-X3B4-IL3 2M |
| Tétel | Model |
| Méret | M12 |
| Árnyékolt | Shielded |
| Baud sebesség | -IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps) |
| Anyagok | Case |
| Megjelenés | Sensing distance |
| Adathossz | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) |
| Indikátorok1 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit)In the IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Szorítóanyák | Nickel-plated brass |
| Távolság1 beállítása | 0 to 2.4 mm |
| Szabályozó kimenet | Load current |
| Üzemmód | PNP NO/NC switching type (Factory setting: NO) |
| Fogazott alátét | Zinc-plated iron |
| Érzékelő felület | PBT |
| Maradékfeszültség | 2 V max. (Load current: 100 mA, Cable length: 2 m) |
| Érzékelési távolság | 3 mm ±10% |
| Csatlakozási mód | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) |
| Minimális ciklusidő | -IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms |
| Áramfogyasztás | 20 mA max. |
| Differenciálmű mozgás | 10% max. of sensing distance |
| Válaszfrekvencia2 | 1 kHz |
| Védettségi fok | IEC 60529 IP67, in-house standards: oil-resistant3 |
| Tápfeszültség | 10 to 30 VDC (including 10% ripple (p-p)) |
| Fő IO-Link funkciók | Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, and initial reset |
| Kommunikációs specifikációk | IO-Link specification |
| M12 előre bekötött Smartclick csatlakozós modellek (0,3 m) | 1: +V3: 0 V4: C/Q output |
Műszaki adatok és teljesítményadatok
Telepítési és üzemeltetési útmutató